Maxi Jet Wave
Order Before 3pm for next day delivery
Maxi Jet Wave 1000
Growers love the Maxi Jet range for its true versatility. Use it as a submersible pump in your hydroponic tank or keep it outside for easy maintenance.
This Maxi Jet model blows competitors out of the water. This 2-in-1 pump can be used underwater or externally! Like the Maxi Jet 1000, it moves up to 1000L of nutrient solution per hour - but it’s over 4 times more energy efficient.
The Wave 1000 has the same flow rate as the Maxi Jet 1000. However, it runs at a fraction of the cost.
It uses just 2.8W of energy when in operation - less than a quarter than its predecessor. This means you’ll see the same results, just with a considerably lower energy bill.
360° adjustable water outlet
Just like the others in the Maxi Jet range, this model has a fully moveable outlet. Position it and rotate for easy reach, or to keep out the way of your other equipment.
Adjustable flow rate
Use the dial on the underside of the pump to adjust theWave 1000’s speed. On full power, it can move up to 1000 litres of nutrient solution through your hydroponic tank per hour. The speed dial is easy to reach, yet out of the way of the rest of your equipment - or clumsy hands.
The Wave 1000’s adjustable flow provides the freedom to control the pump according to your plants’ needs.
The Wave 1000 secures into place using a strong magnetic attachment - no glues, screws, or adhesive needed. This means there are no permanent changes to your hydroponic system and you can remove and replace the pump as many times as needed. It couldn’t be easier to clean or adjust.
The magnet works for glass up to 10mm thick - just place one piece of the magnet on the outside of your hydroponic tank (if using as a submersible pump) and the other inside the tank.
The magnet also has an anti-vibration feature - so, even as the pump works, there will be no noise or movement.
How to use Maxi Jet Wave 1000?
Submersible use: Ensure the appliance is turned off before installing. Attach a 12mm or 16mm pipe to the outlet and submerge the pump in your hydroponic tank or reservoir.
Place the pump onto the area you would like to fix the Maxi Jet Wave 1000, with the magnetic fixture facing the wall of the tank. Place the second magnetic piece directly parallel to the pump on the outside of the tank. The magnets should secure the Maxi Jet Wave 1000 firmly in place.
You may rotate the pump’s outlet in any direction so that it fits comfortably in your hydroponic system.
External use: Ensure the appliance is turned off before installing. Attach a 12mm or 16mm pipe to the inlet and outlet of the pump. Place outside of your reservoir or hydroponic tank, less than 0.65m (65cm) above the water line. Secure using the magnetic attachment to a wall, board, or surface less than 10mm thick.
While the pump has a self-cleaning impeller, we recommend that you run your usual hydroponic cleaning solution through the pump every so often to keep operation as smooth as possible. If you notice any fallen leaves or algae buildup on the pump, turn it off, remove it from your tank (if submerged) and clean gently with a cloth.
Where to use Maxi Jet Wave 1000?
The Maxi Jet Wave is suitable for use in hydroponic systems, tanks, and reservoirs (including NFTs and Flood & Drain systems).
If using the magnetic fixture, attach to a piece of glass up to 10mm thick.
Why choose Maxi Jet Wave 1000?
Submersible multi-use pump;
Can be used underwater or externally;
Adjustable flow rate;
2.8W - uses less than a quarter of the energy of the Maxi 1000;
Magnet attachment - no screws or glue;
Self-cleaning, lubricated impeller;
Moves up to 1000L of nutrient solution per hour.
1 x Maxi Jet Wave 1000 (pump, rotor, and protective grill);
1 x Magnetic Fixture;
1 x 2.5m Cable.
Brand: Maxi Jet
Product Dimensions: 60 x 50 x 44mm
Product Weight: 0.3kg
Outlet Diameter: 12.5mm
Required Tube Diameter: 12 / 16mm
Maximum Flow Rate: 1000L/h
Cable Length: 2.5m